ER-ELECTRIC SD is a concentrated solvent based cleaner used for cleaning and degreasing oil, grease and carbon deposits from the surfaces of electric motors and equipments. It is safe to use on all kinds of metals and their alloys. It has lower evaporation rate than ER-ELECTRIC, which is one of the ERTEK PRODUCTS. Which means lower solvent smell in the area it is used.
ER-ELECTRIC SD should always be used undiluted. It shouldn’t be applied with water or any other solution. The quantity of ER-ELECTRIC SD to be used for cleaning changes depending on the degree of the contamination on the electrical equipment and parts, so it is determined by the user during the cleaning procedure. Although ER-ELECTRIC SD does not have strong solvent smell like quick drying electro cleaners, it must be used in well ventilated areas.
ER-ELECTRIC SD can be applied by several methods like brushing, hand spraying and immersing.
Hand spraying is the most recommended method which is applied by a sprayer. Spray ER-ELECTRIC SD on the highly contaminated electrical parts. Then, the remaining solvent on the cleaned parts can be easily dried up by air blower.
Immersion is a suitable method for cleaning small electrical parts. Parts are immersed in a bath filled with ER-ELECTRIC SD and waited for 10-60 minutes. Then the cleaned parts may be dried up with air.