OIL&GREASE REMOVER is a solvent based liquid developed to clean effectively petroleum and oil deposits from all metal, painted/unpainted surfaces, decks, engine rooms and bilges.
It is advised to use OIL&GREASE REMOVER in its concentrated state at room temperature.
The quantity of OIL&GREASE REMOVER to be used changes depending on the degree of contamination and cleaning desired.
OIL&GREASE REMOVER can be applied with two different methods which are brushing and soaking/immersion.
Brushing is a convenient method to clean light accumulation of large/small surface areas and contaminated engine parts. Good results can be obtained cleaning unshaped surfaces by this method.
Soaking/Immersion method can be used to clean dismantled parts or engine components efficiently. The parts to be cleaned are immersed into a bath filled with undiluted OIL&GREASE REMOVER and waited for 30-40 minutes approximately. Then, cleaning procedure is completed by rinsing the parts with water.
Brushing and Soaking methods can be applicable together to clean on the highly contaminated surfaces.