DESCRIPTION

ER-APC NF” is an ecological water based cargo tank cleaner. It is a superior high-quality cleaner and degreaser to remove oil, diesel oil or mineral oil from any surface. ER-APC NF is low-toxic, biodegradable and safe to use for the operating personel. Besides Tank Cleaning properties ER-APC NF is an excellent cleaner for machine rooms, decks, cabins, tool cleaning and floor cleaning. ER-APC NF is also very effective cleaner to remove the stains from woven fabric, rugs, couch etc. It does not cause foaming hence it contains antifoam. Composed foam decreases fastly.

APPLICATION, FEATURES & BENEFITS

  • Waterbased cleaner
  • Low-Toxic
  • Non flammable
  • Promotes pleasant and healthy environment
  • Self splitting after cleaning
  • Very economical dillution rate
  • Numerous marine cleaning & degreasing applications
  • Biodegradable

DIRECTIONS FOR USE/ APPLICATION RATES AND DOSAGE RATES

General Cleaning:

For such usage prepare 2-3% ER-APC NF solution with water, apply it on dirty surface with mop, brush or sprayer. Wait for 5-10 minutes then rinse with water. Heat the solution to get better results. For heavy duty cleanings use the product directly without dilution over the oily surface and leave it for 5-10 minutes, brush the surface and rinse with water.

Direct Injection Method:

Use 10-15 % cleaning solution in fresh water, leave the solution on the surface for 5-10 minutes than wipe away. Heat the solution to get better results. It is not corrosive so it can be used on every surface.

Recirculation Method:Use 0,1-1,0 % cleaning solution in fresh water and circulate or spray with water jets The solution can be re-used until it is no longer effective.

Spot Cleaning: Depending upon the contamination, ER-APC NF should be sprayed undiluted or diluted up to 20% in water and allowed to soak on the area for 20 – 30 minutes. It must then be washed down with plenty water.

The efficiency may be increased by using warm water up to 60°C while cleaning and rinsing the surfaces of tank coating